Mofi Electronics

Explore Mofi Electronics

Mofi Electronics has introduced a new line of analog components featuring two turntables, two phono stages and three phono cartridges. These are from a company that makes the finest vinyl albums available today and with a long history. 
 

"The wait was well worth it."

OustandingPerformance-2017

"...tonal rightness and a lack of distortion including surface noise, that’s almost spooky." -StereoNET

"...a deep sense of ease settles in as the UltraDeck’s perfect pitch and foot-tapping sense of timing takes over." -StereoNET

"MoFi has produced an American made turntable that’s well engineered and built, looks great, and sounds sublime- and they brought it to market at a very reasonable price. I can see why it took so long to finally become available. The wait was well worth it." -Vinyl Me Please

"Spending time with the MoFi Electronics MasterTracker reminded me again just how great high-output cartridges can sound." -PartTime Audiophile


UltraDeck Turntable

$1999.00
$2,299.00 with $499.00 factory factory mounted UltraTracker cartridge-
SAVE $200.00
$2499.00 with the $699.00 factory mounted MasterTracker cartridge-SAVE $300.00
 
In the Feb 2018 Stereophile Herb Reichert sums with:
"The Mofo UltraDeck is one of the most lucid, engaging, and natural sounding record players available for under $5000.00."
"HIGHLY RECOMMENDED"

The Absolute Soud review summed with:
The UltraDeck is a smartly conceived and finely honed design that’s already earning its place as an instant classic.
Stereophile named the UltraDeck+ turntable with UltraTracker phono cartridge their Analog Product of the Year for 2018

“This is as good as analog gets for $2,200.”
TONEAudio, Exceptional Value Award

"[The MasterTracker is] the music-rendering equal of any high-output cartridge at any price."
Stereophile




  • 33-1/3 / 45.0 RPM belt drive turntable
  • Custom design and manufactured in the USA
  • 10-inch MoFi Ultra Tonearm
  • 1.3-inch Delrin® platter
  • Isolated 300 RPM AC synchronous motor
  • Anti-Vibration feet designed by HRS
 

Deemed an "instant classic" by The Absolute Sound, UltraDeck+ immediately stands out via its super-sturdy, unshakable physicality that includes a 1.3-inch Delrin platter – 75 percent thicker than that on Mobile Fidelity's StudioDeck model – that delivers deep-black backgrounds and a fantastically low noise floor. Delrin is chosen due to its natural impedance match with vinyl. Speaking of being made for LPs: UltraDeck+'s 300RPM isolated AC synchronous motor offers excellent speed stability for stellar pitch accuracy and rhythmic drive. Better still, UltraDeck+'s constrained layer dampening build – comprised of three aluminum plates bonded to the MDF body – adds extra mass, eliminates coloration, and contributes to increased stability. It's just another way UltraDeck+ takes its purpose to the extreme.

Mobile Fidelity's engineering prowess extends to the custom-developed Ultra tonearm, a 10-inch straight aluminum gimbaled bearing design whose rigidity and tracking prowess translate into hyper-accurate information retrieval. Ultra tonearm also uses Cardas Audio wiring to maintain signal purity from the head shell leads all the way through the RCA connectors. Adjustable tracking force, VTA, azimuth, and anti-skate grant you limitless options for tweaks and adjustments. A hardened-steel inverted bearing system complete with sapphire materials provides UltraDeck+ wonderfully smooth, rotational stability while anti-vibration feet – co-developed with the engineering team at Harmonic Resolution Systems, the world leader in vibration isolation – further shield UltraDeck+ from disruptive resonances. Again, everything circles back to preserving the genuine sound locked in the grooves of your LPs. It's why Mobile Fidelity even outfits UltraDeck+ with high-quality gold-plated connectors shielded by a copper foil box to prevent airborne RF noise and, as a bonus, includes a removable, hinged dust cover to guard against debris when the 'table isn't spinning records.

The word “Ultra” is synonymous with Mobile Fidelity Sound Lab's philosophy. It represents their extreme pursuit of the highest level of reproduction of recorded sound—beyond the status quo—to provide music lovers with the experience of hearing the Original Master Recording in their home. Whether you're enjoying a standard LP or one of their UltraDisc One-Step limited-edition records, UltraDeck will deliver faithful playback of what's in the grooves.

Custom-developed and manufactured in the USA, the 10-inch Ultra tonearm uses smooth, high-quality ball bearings for low friction in the vertical and horizontal plane so all you hear is what is in the grooves. Cardas Audio wiring maintains signal purity from the headshell leads all the way through to the high-quality, gold-plated RCA connectors.

The stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin® pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the turntable.

UltraDeck features Constrained layer Dampening. Three aluminum plates carefully bonded to an MDF body to add mass and eliminate tonal coloration, maintaining the true sound found on the record.

The Ultra Deck also features Anti-Vibration feet by HRS, a massive 1.3 inch 6.8 pound Deltin platter and hardened-steel inverted bearing system for smooth, quiet rotational stability.

SPECIFICATIONS

Motor: 300 RPM AC Synchronous

Speeds: 33 1/3 RPM, 45.0 RPM

Platter: 6.8 lb Delrin®

Wow & Flutter: 0.017% – 0.025%

Signal-To-Noise Ratio: 74dB

Power Supply Requirements: 120V 60Hz, 220-230V 50Hz, 100V 50Hz

Power Consumption: < 5W

Dimensions: 19.69" x 6" x 14.25"

Weight: 23.1 lb

 


StudioDeck Turntable

$1,199.00
$1349.00 with $199.00 factory pre-mounted StudioTracker cartridge
$1499.00 with $499.00 factory pre-mounted UltraTracker cartridge
$1699.00 with $800.00 factory pre-mounted MasterTracker cartridge


 
In the cNet revirew threy said:
"The $999 MoFi StudioDeck looks, sounds and feels terrific -- and it’s made in the US."
"The StudioDeck's general composure was assured, very clean, clear, and it just went about its business of playing LPs without any hitches. Lesser turntables accentuate LP surface noise clicks and pops, the StudioDeck did not."
"The StudioDeck's isolation from external knocks is above average, so
my fist pounding on the shelf didn't disturb the turntable one bit."
"MoFi also sent along their $249, StudioPhono preamplifier. It easily sounded a lot better, clearer and more alive than our Rotel RA-1592 ($2,499,) integrated amplifier's built-in phono preamp."

See the entire review at:  https://www.cnet.com/news/this-straight-up-audiophile-turntable-costs-le...
  •  
  • 33-1/3 and 45.0 RPM belt drive turntable
  • Custom design and manufactured in the USA
  • 10-inch MoFi Studio Tonearm
  • 3/4-inch Delrin® platter
  • Isolated 300 RPM AC synchronous motor
  • Anti-Vibration feet designed by HRS
While it’s their entry-level offering, StudioDeck produces high-caliber sound at a value price. Designed in collaboration with some of the world's finest audio designers, StudioDeck features an incredible amount of ingenuity and technology usually reserved for much more expensive products.

Custom developed and manufactured in the USA, the 10-inch straight aluminum gimbaled bearing tonearm delivers the ideal balanced of rigidity and low tracking error, so all you hear is what is in the grooves. Tweak to your heart's delight with provisions for adjustable tracking force, VTA, azimuth, and anti-skate.

The 300 RPM stepped-pulley AC motor provides excellent speed stability for pitch accuracy and rhythmic drive. The Delrin® pulley has two positions for 33 1/3 and 45 RPM speed selection. Motor vibrations are kept away from the platter and stylus by using advanced dampening materials that decouple the motor from the rest of the turntable.

StudioDeck features CONSTRAINED LAYER DAMPENING. An aluminum plate carefully bonded to an MDF body to add mass and eliminate tonal coloration, maintaining the true sound found on the record.

The Ultra Deck also features Anti-Vibration feet by HRS, a 3/4 inch 3.8 pound Deltin platter and hardened-steel inverted bearing system for smooth, quiet rotational stability.

SPECIFICATIONS

Motor: 300 RPM AC Synchronous

Speeds: 33 1/3 RPM, 45.0 RPM

Platter: 3.88 lb Delrin®

Wow & Flutter: 0.017% – 0.025%

Signal-To-Noise Ratio: 72dB

Power Supply Requirements: 120V 60Hz, 220-230V 50Hz, 100V 50Hz

Power Consumption: < 5W

Dimensions: 19.69" x 5.375" x 14.25"

Weight: 19.1 lb

UltraPhono Phonostage with Class A headphone amplifier

$499.00
 
  • Selectable gain for MM or MC 40dB, 46dB, 60dB, 66dB
  • Adjustable loading 75Ω - 47kΩ
  • Class A headphone amplifier
  • Switchable Mono mode
  • Subsonic filter
  • External power supply
UltraPhono replicates the wide bandwidth transparency Mobile Fidelity Sound Lab mastering engineers demand. Tim De Paravicini, the designer responsible for the Mobile Fidelity Gain2™ Ultra Analog cutting system, assisted with the internal circuitry to ensure your analog system at home faithfully reproduces the music buried in the grooves of your LPs. UltraPhono also includes an audiophile-quality Class A headphone amplifier for intimate listening enjoyment.

ADJUSTABLE GAIN AND LOADING

With selectable gain and loading, you will be able to tailor UltraPhono to match nearly any moving-magnet or moving-coil cartridge on the market. A readily accessible bank of toggle switches can be found on the unit’s underside to quickly make adjustments without the need for any tools.
 

CLASS-A HEADPHONE AMPLIFIER

UltraPhono includes a powerful Class A headphone amplifier perfect for quiet nights when you want to keep the records spinning in private. And with a 31-step volume control built into the unit, all you need to do is directly plug-in your headphones and turn it up! It's the easiest way to achieve high-fidelity vinyl playback without speakers and electronics.

 

StudioPhono Phonostage

$299.00
 
  • Selectable gain for MM or MC 40dB, 46dB, 60dB, 66dB
  • Adjustable loading 75Ω - 47kΩ
  • Switchable Mono mode
  • Subsonic filter
  • External power supply

Two selectable toggle buttons on the top of the unit can engage Mono or Subsonic filter mode. If you're a fan of mono recordings, vintage or reissues like the Beatles in Mono box set or the Mobile Fidelity Sound Lab Bob Dylan Series, the Mono mode will come as a revelation. It will improve image stability and generate richer tone.
 

ADJUSTABLE GAIN AND LOADING

With selectable gain and loading, you will be able to tailor UltraPhono to match nearly any moving-magnet or moving-coil cartridge on the market. A readily accessible bank of toggle switches can be found on the unit’s underside to quickly make adjustments without the need for any tools.

Cartridges

 

MasterTracker Cartridge

$799.00

  • V-Twin dual-magnet generator
  • Micro-Line stylus and tapered cantilever
  • Well-damped billet aluminum body
  • Ohno continuous cast copper coils
  • 3mV output

UltraTracker Cartridge

$499.00

  • V-Twin dual-magnet generator
  • Nude Elliptical stylus
  • Well-damped billet aluminum body
  • 3.5mV output

StudioTracker Cartridge

$199.00

  • V-Twin dual-magnet generator
  • Elliptical stylus
  • Polymer body
  • 3.5mV output