DSPeakerDealer inquiries welcome
The X4 is now shipping and in stock- See info below
The DSPeaker Anti-Mode 2.0 Dual Core is a Preamp, DAC, tone controller, parametric equalizer & room correction device in one package under $1200.00. On sale for $899.00 delivered
Now with Asynchronous USB
Class A rated in Stereophile
"...offers the wonders of DSP correction with ultra-high sonic quality"
"it is Alladin's genie except you get a lot more than three wishes!"
- Dr. Robert E. Greene / TAS September 2012
See the superb review in the February 2013 Absolute Sound where Robert summed up with:
"In the end you can get truly remarkable sound out of a system corrected and adjusted with a DualCore. One thinks of the introduction to The Three-Penny Opera: “Conceived with a splendor that only a beggar could imagine and ….so cheap that even a beggar could afford it.” Well, not quite that cheap. But still a wild bargain, and a sonic wonder.”
Read the full review in The Absolute Sound Magazine here:
In Paul Seydor's Newport Show report from the 2014 show he says:
Most Significant Product:
I can’t think of another investment that will bring more improvement in sound for the dollar than SimpliFi’s Dual Core Antimode DSP with or without the ULN-3 PSU optional power supply
Part Time Audiophile said:
And that’s when Walter showed the Ace he’d tucked up his sleeve: the DSpeaker Anti-Mode Dual Core 2.0 he was using as a preamp. Walter A/B tested this device for me, cutting the room correction in and out of the chain; the DSpeaker greatly cleared up the midrange and upper bass regions to an extent that I would have thought improbable. All I can say is: “more demo rooms at audio shows need this”. Assuming you don’t want to schlepp a couple hundred pounds of room treatments across the country, it really can nail down an unfriendly room, and do so with some shockingly great results.Wickedly cool.
Read the entire report at:
Paul Seydor from the Newport Beach show report in 2012 said:
Greatest bargain (single product)
DSPeaker Anti Mode 2.0 Dual Core—a fully automatic room correction device (also DAC) that works spectacularly and at almost a chump change price.
Call to discuss into pricing and this amazing product.
The Updated '2013 Edition' is now available and shipping in 1-2 days from order date
$999.00 with FREE FREIGHT in the 50 states
Anti-Mode 2.0 Dual Core($1199.00) is a must-have device for any audiophile who is serious about the sound quality in home environment.It can be used as a room correction device belwo 500Hz or as room correctiuon plud preamp plus DAC. It also has a full parametric Equalizer for tonal balance control.
It is not only a new generation automatic room correction and one of the most versatile devices to adjust the overall tonal balance, but also a standalone room analyzer. With a press of a button, it offers the same performance and accuracy as the best computer based measurement softwares accompanied by a professional level soundcard and calibrated microphone. Of course, you can even export the measurement data using USB, but then again, you don't really need to. You can see the accurate response on screen, and all the important room corrections have been made automatically. It can run with your preamp and DAC or be used with an amp and speakers as the entire front end.
Anti-Mode 2.0 Dual Core can be connected to almost every audio system.
HARDWARE CHANGES IN '2013 EDITION'
- Input Sensitivity RCA: 1.6 / 3.25 Vrms, XLR: 1.3 / 2.6 Vrms
- Output Voltage RCA: 1.65 Vrms (max), XLR: 3.25 Vrms (max)
- Power consumption 9VAC / 12VDC (typical): active 2.6W, stand-by 0.6W
- Input Sensitivity RCA: 2.0 / 4.0 Vrms, XLR: 3.9 / 7.9 Vrms
- Output Voltage RCA: 7.2 Vrms (max), XLR: 14.4 Vrms (max)
- Power consumption 12VDC (typical): active 4.5W, stand-by 0.8W
- New, improved Anti-Mode 2.0 automatic room correction algorithm
- Can be used as a locally clocked high quality jitter-free DAC
- Supports USB audio as well as S/PDIF input/output via optical toslink
- Dual balanced ADCs to deliver the highest level of audio performance that meets the expectations of most demanding audiophiles
- Dual per channel balanced DACs with jitter free operation (local crystal), oversampling to 6144 kHz, DSP buffering and filtering.
- Can be used as a high quality pre-amp with remote volume control
- Extensive sound customization options, including quick house curve design tool, linear-phase full spectrum tilt, several parametric EQs etc
- Supports several sound profiles (e.g. independent ”sweet spots” and/or equalizer settings), quickly switchable with the remote controller
- Friendly graphical user interface, very easy to set-up and operate
- Ability to measure and display room responses on a built-in 262k-color TFT display
- ”Pure digital” mode using S/PDIF input & output: signal is processed in the digital domain all the way (S/PDIF output resolution is independent from input)
- Digital signals are re-aligned for jitter-free operation
- Versatile connectivity: insert Anti-Mode 2.0 Dual Core between your existing pre-amp and power amplifier or powered speakers or utilize the processor loop or tape loop of your integrated amplifier (or use it as a standalone DAC / preamp!)
Upgrade your DSPeaker performance:
The Wyred 4 Sound uLink USB to Toslink Converter and or the Wyred 4 Sound Remedy Femto Reclocker will both upgrade the DSPeaker performance. The uLink for computer audio and the Remedy for all sources.
- 1 x RCA inputs
- 1 x XLR inputs
- 1 x RCA outputs
- 1 x XLR outputs
- Toslink S/PDIF digital input
- Toslink S/PDIF digital output
- Microphone jack
- 12VDC/9VAC power connector
- 1 x VS1000 (GUI&USB)
- 2 x VS8053 IceDragon (Audio)
- 40-bit, 2-channels
- Anti-Mode 2.0 Multi-Rate (FIR & IIR)
- House Curve filter
- Linear-Phase Tilt
- Parametric EQs
- Adjustable Infrasonic
- Adjustable cross-over
|Dynamic Range:||> 108dB|
|Volume Control Steps:||0.5dB|
|Input Sensitivity XLR:||1.35/2.60 V(RMS)|
|Input Sensitivity RCA:||1.65/3.25 V(RMS)|
|Output Voltage Unbalanced RCA:||1.65 V(RMS)|
|Output Voltage Balanced XLR:||3.25 V(RMS)|
|ADC:||6.144 MHz oversampling dual per channel|
|DAC:||6.144 MHz oversampling dual per channel, local clocking, buffering|
NOTE TO OWNERS OF THE ORIGINAL 2012 DUAL CORE
The original Dual Core had the standard / typical RCA and XLR input / output sensitivities which worked fine with sources and downstream devices which adhered to these standards.
Based on customer feedback and to cater for a wider range of sources and down stream devices DSPeaker have now increased both the input and output sensitivities....
If you are an existing Dual Core user and did not encounter ' input clipping messages ' this upgrade is likely of NO BENEFIT to you. We do take older 2012 models in trade for the new 2013 version if you have clipping issues.
The new X4 is now shipping
DSPeaker X-4 State of the art 4 channel preamp processor with auto room correction and DSD DAC
Now shipping in limited quantities
The new X4 is a 4 channel preamp/DAC with room correction and excellent headphone amp. It can be used to biamp the Emerald speakers or any other speaker or add subwoofers.
Preliminary Features are as follows:
3 x Coaxial input
3 x Toslink input
2 x Analog RCA input
1 x XLR analog input
USB Audio at 32 bit 384k with 2 x DSD decocing
Thermometer (5D Anti-Mode™)
12V trigger output
2.2 Analog RCA output
2.2 Balanced XLR output
1 x Coaxial output
1 x Toslink output
6.3mm Headphone output (headphone-DSP, EQ, X-feed / HRTF process, render)
Balanced XLR 48V "phantom" microphone input
X4 rear rendering
8033 SII subwoofer equalizer
- Measures and corrects the combined frequency response of your subwoofer system and the listening room
- User-friendly automatic calibration procedure
- Can be used with any active subwoofer
- Minimum phase filtering, no significant algorithm delay
- Correction range 16-144 Hz
- Three user-selectable additional equalization filters
- Single or multiple measurement point calibration
- Measurement microphone is included
- Ultra-compact enclosure: 5" x 3.2" x 1.1"
- Low power consumption: 1.5 W
- RoHS directive compliant