 |
|
|
 |
|
|
|
In exclusive partnership with top-tier modification house Parts ConneXion, Underwood HiFi is proud to offer the following carefully tested, factory-authorized performance enhancement packages for the Eastern Electric MiniMax tube CD player.
By virtue of selling consumer-direct, we can offer these super-charged, brand-new models for $250 less than the same modifications would cost retro-fitted - though we offer that, too.
|
|
|
|
|
 |
|
The stock Minimax is a very good 6922-based, $1350 player with HDCD capability. The mod is designed by Chris Johnson, the founder and former president of Sonic Frontiers. Our modified machine is now competitive with players that are selling for up to $3000. It is very accurate and has the liquid midrange that most audiophiles are looking for.
|
|
|
 |
|
|
|
|
MiniMax CDP Level-1 mod - $1,750 + shipping ($650 retro-fit)
The following details describe our Level-1 mod:
- Eight ultra-fast soft recovery International Rectifier Hexfred and Telefunken Fred diodes are added to the power supply.
- Two Black Gate standard-grade electrolytic capacitors are added to the I-V power supply position.
- We add one sheet of Soundcoat dampening material to the internal chassis
- Four Ear compliant Sorbothane isolation feet are added to the bottom to damp external resonances.
- One pair of Vampire OFC copper body, gold-plated RCA output jacks are added to the rear for better signal transfer.
- 8 Riken Ohm 0.5, 1 and 2 watt resistors with gold-plated leads are run in the signal path.
- Two Auricap metallized polypropylene output signal coupling capacitors are installed.
- Four polystyrene capacitors are added to the I-V and feedback positions.
- Two Analog Devices AD825 surface-mount op amps are mounted to adapter pcbs and used in the I-V position replacing the $3.00 op amps of the stock unit.
- One pair of Electro-Harmonix gold-pin 6922s replace the stock tubes.
- We use two feet of DH Labs pure silver Teflon dielectric hookup wire.
- WBT silver solder is used throughout the mod.
- We spend 5 hours labor to perform the mod.
- We offer a 90 days parts/labor warranty on the mod.
|
|
|
Sonic changes of our Level-1 mod
- The unit is quieter, the blacks are blacker, thus resolving more low-level detail and ambiance.
- Transparency is much improved and you can now look farther into the soundstage.
- It has a more liquid midrange and the presentation is more neutral from top to bottom.
- There is more inner detail and the unit is more dynamic.
- Images are better sized and defined.
- Stage width and depth are both improved.
- Bass slam and extension are dramatically improved and offer fuller weight and authority. The player now competes with very expensive machines at the frequency extremes.
Our Level-2 mod takes this player to yet another level and adds another 30% of performance over the Level-1. The bass is better, dynamics are improved and transparency is enhanced.
|
|
 |
MiniMax CDP Level-2 mod - $1,990 + shipping ($950 retro-fit)
The following details describe our Level-2 mod:
- We use 1 pair of WBT NextGen pure silver RCA output jacks
- We add 2 additional Black Gate VK series 150uf 350V power supply caps
- We add 2 Rel-Cap TFT Teflon film and tin foil bypass coupling capacitors
- We upgrade the opamps to the Burr-Brown OPA627AU surface mount op amps with adapter PCBs in the I-V position The 627 is the world's best- sounding audio op amp.
- We upgrade the tubes to one pair of NOS Mullard ECC88 vacuum tubes.
- We offer a 90 days parts/labor warranty on the mod.
|
|
|
 |
Click the Next Arrows to return to the ModPage.
Or click on our e-mail below to ask further questions.
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|